We are pleased to present the Xtirpa™ IN-2087 Universal Ring Adapter, a stainless-steel anchorage ring specifically designed for use with the Xtirpa™ Pole Hoist System. An adaptable wall or ceiling mounted anchor, it allows safe horizontal or vertical operations in confined space setups.
Application & Advantages
The IN-2087 offers a dependable anchorage point, ideal for overhead ceiling or wall installations in vessels, tanks, or structural environments. Compatible with crossover fall protection and retrieval systems, it integrates seamlessly into Xtirpa’s modular architecture to support SRLs or winches as part of a captured-fall or rescue operation.
Installation Considerations
While designed for horizontal or vertical use, the IN-2087 is not intended for direct davit arm installation. Installations must conform to concrete or structural substrate requirements and appropriate anchor hardware must be selected to achieve full certification. Refer to the full datasheet and local technical guidance for proper anchorage verification.””
Working Load Limit (WLL)
164 kg (360 lb)
Anchorage Minimum Breaking Strength
F1: 22.2 kN (5,000 lbf) F2: 22.2 kN (5,000 lbf)
Standards
ANSI Z359.1 (Class A) user capacity: 1 CSA Z259.2.1 (R2011) user capacity: 1 OSHA 1910.66 (2012) user capacity: 1 EN 795 (Class A) user capacity: 1
Structure Material
Stainless Steel
Welding Certification
AWS D1.6
Unit Weight
5.9 kg (13.0 lb)
Installation / Substrate Notes
Installation compliance is the responsibility of the local engineer Minimum 3/4" (M20) stainless-steel anchors; smaller anchors must be validated by the local engineer Typical installation reference: 21 MPa (3000 psi) reinforced concrete Minimum pullout strength per fastener: 3.0 kN (674 lbf) Maximum vertical load applied to the structure: 12.0 kN (2,698 lbf)
Mounting Orientation
Ceiling or wall mounting; horizontal or vertical orientation; fixings/bolts not included
Reviews
There are no reviews yet.