Thermal-Grip TGIP4000 – 4″ Insulation Pin for Concrete/CMU, 500ct

Thermal-Grip TGIP4000 – 4″ Insulation Pin (Concrete/CMU), 500ct

Designed to mechanically attach rigid insulation to concrete, masonry, tilt-up/precast walls, and CMU using gas-actuated insulation fasteners—no screws or adhesives required.

ANCHOR LENGTH = INSULATION THICKNESS

The Thermal-Grip® Insulation Pin is a large 2.25″ diameter washer head fastener with pins available in lengths from 1″ to 6″. Use with Thermal-Grip IP Insulation Fastening Tools for rapid attachment.

Concrete/CMU Applications

Permanently attaches insulation with a flush finish

For use attaching rigid insulation including XPS, EPS, polyisocyanurate, and mineral wool

Material Specifications

Pin: Galvanized carbon steel

Washer: Polypropylene

Application: Use with the IP40D or IP50D tool. The IP40D installs pins 1″4″. The IP50D installs pins 1″6″.

Washer: 2-1/4″ (57 mm) diameter, solid plastic, to reduce thermal bridging.

Product Specifications

Application	Concrete / CMU
Anchor Length	4″
Washer Diameter	2.25″
Package Quantity	500 pcs
Average Pin Pull Out Values	IP40D (Concrete): 4000 PSI = 442.2 lb; 5000 PSI = 624.7 lb; 6000 PSI = 625.2 lb; CMU Block = 424.9 lb. IP50D (Concrete): 4000 PSI = 676.7 lb; 5000 PSI = 628.86 lb; 6000 PSI = 583.36 lb; CMU Block = Not recommended.