Strong-Point CH496 – 1/4 x 6″ Hex Head Concrete Screw, Blue Ceramic 500ct

Strong-Point CH496 – 1/4 x 6″ Hex Head Concrete Screw, Blue Ceramic 500ct

Strongcon Slotted Indented Hex Washer Head, Hi-Low, Notched Threads, Diamond Point, Blue Ceramic Coating, 1/4 x 6, 5/16 A.F. Head, Box of 500

Application: Attaches wood or metal to concrete, brick, cement block or masonry.

Installation: Using a 3/16 carbide masonry drill bit and hammer drill (in hammer mode), drill a hole 1/4″ deeper than the minimum embedment requirements of the concrete screw to be installed*. Clean the dust from the hole using compressed air or hand pump. Use a 5/16″ nut setter with hammer mode turned OFF or a standard rotary drill to install fastener until seated. Do not over torque as it can cause the head to snap or stripping of the recess. *When installing into Hollow Block CMU drill through the full thickness of face wall.

Features:

Ceramic coating exceeds 500/hr. salt spray resistance

Designed to work with ACQ, pressure, and fire treated lumber

Notched threads for cutting into concrete, brick and cement block

Diamond Point design for cutting and clearing debris during installation

Meets ASTM A 510 for carbon steel manufacturing

Product meets ASTM B-117 for salt spray corrosion testing

Miami-Dade County product control approved. NOA-15-0930.14

Specifications:

Drive Type	Hex
Screw Size	1/4
Diameter	1/4
Length	6″
Size	1/4 x 6
Head Style	Hex Washer Head
Fastener Style	Concrete Screws
Material Application	Attaches wood or metal to concrete, brick, cement block or masonry.
Box Qty.	.5M
Weight (lbs.)	22
UPC	841355090182