PFERD 47932 – Unitized Mounted Point, Cylindrical Shape, W177, 8AC (H), 1/4″ Shank (10pk)

PFERD 47932 – Unitized Mounted Point, Cylindrical Shape, W177, 8AC (H), 1/4″ Shank

Multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system. The aluminum oxide A version is ideal for general-purpose applications on steel and non-ferrous metals. The cylindrical shape is ideal for grinding bores, radii and contours.

Applications

Cleaning

Deburring

Step-by-step fine grinding

Roughening

Structuring (matt finishing, brush matting and satin finishing)

Surface work

Work on weld seams

Features

Cost-effective due to high abrasive performance and durability.

Produces very good surface quality.

Can be profiled as desired, enabling optimal adjustment to the contour.

Materials

Aluminum	Copper	Steel materials with a hardness> 54 HRC
Brass	Fibre-reinforced thermosetting plastics (GRP, CRP)	Steels up to 370 HV (< 38 HRC)
Bronze	Hardened, heat-treated steels over 370 HV (38 HRC)	Thermoplastics
Cast steel	Nickel-based alloys (e.g. Inconell and Hastelloy)	Titanium
Cobalt-based alloys	Stainless steel (INOX)	Titanium alloys

Recommendations

For the best performance, use with a recommended peripheral speed of 2,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and flap wheel/cross buff wear.

Considerably reduce peripheral speed for work on materials with poor heat-conducting properties, e.g. titanium and stainless steel.

Specifications

Product Type	Fine grinding and finishing products
Drive Type	Flexible shaft drive, Straight grinder
Shank Diameter	0.25″
Width	3/4″
Abrasive Material	Aluminum oxide A
Grit Size	G (coarse)
Shape	Cylindrical
Max RPM	38100 RPM
Weight	0.022 lb