Midland Industries 311-44 -Champion Brass Elbow, 1/4″ Hose Barbed x 1/4″ MPT, Brass

Champion Brass 311-44 Elbow, 1/4″ Hose Barbed x 1/4″ MPT, Brass

SKU: 311-44
Connection Size 1	1/4 in
Connection Size 2	1/4 in
Connection Type	Barbed|MPT
Connection Type 1	Hose Barbed
Connection Type 2	MPT
Dimensions	0.56 in W
Fitting Type	Elbow
Hex Size	1/4-18
Material	Brass
Material Construction	Brass
Maximum Operating Pressure	150 psi

Typical Application: Low Pressure Air, Fuel, Lube, and Oil Lines Pressure determined by tube material and hardness.
Our parts have been tested to max 150 PSI. Advantages: Easy assembly. No clamps needed!!

Assembly Instructions:

1- Lubricate insert.
2- Hold hose at angle as shown & push on and up
over first barb.
3- Continue to push straight on until hose is seated
under protective plastic cap. Keep hands back from
hose end area so that hose can expand.

Disassembling Instructions:

1- Split hose. Do not cut completely through hose.
Sealing edge of barb could be damaged.
2- Bend hose and remove with a quick pull.

See lead free section for lead free push-on barb fittings.
Stainless steel available at the end of this
section.