Midland Industries 30484 – 90° Elbow, 1/2″ Push-On Hose Barbed x 1/2″ Female SAE 45 deg/37° JIC

Midland Industries 30484 90 deg Elbow, 1/2″ Push-On Hose Barbed x 1/2″ Female SAE 45 deg/37 deg JIC Swivel

SKU: 30484
Additional Information	2.33 x 1.09 in Center to End, 0.170 lb Weight
Connection Size 1	1/2 in
Connection Size 2	1/2 in
Connection Type	Barbed|Female JIC Swivel
Connection Type 1	Push-On Hose Barbed
Connection Type 2	Female SAE 45 deg/37 deg JIC Swivel
Finish	Zinc-Plated
Fitting Type	90 deg Elbow
Material	Steel
Material Construction	Steel
Pressure Rating	150 psi
Thread Size	3/4-16

Typical Application: Low Pressure Air, Fuel, Lube, and Oil Lines Pressure determined by tube material and hardness.
Our parts have been tested to max 150 PSI. Advantages: Easy assembly. No clamps needed!!

Assembly Instructions:

1- Lubricate insert.
2- Hold hose at angle as shown & push on and up
over first barb.
3- Continue to push straight on until hose is seated
under protective plastic cap. Keep hands back from
hose end area so that hose can expand.

Disassembling Instructions:

1- Split hose. Do not cut completely through hose.
Sealing edge of barb could be damaged.
2- Bend hose and remove with a quick pull.

See lead free section for lead free push-on barb fittings.
Stainless steel available at the end of this
section.