Midland Industries 30429 – 37° Swivel, 1″ FJIC x 1″ Push-On Hose Barbed, Brass

Midland Industries 30429 37 deg Swivel, 1 in FJIC x 1 in Push-On Hose Barbed, Brass

SKU: 30429
Additional Information	0.39 lb Weight
Connection Size 1	1 in
Connection Size 2	1 in
Connection Type	Female JIC|Barbed
Connection Type 1	FJIC
Connection Type 2	Push-On Hose Barbed
Dimensions	2.6 in L
Fitting Type	Swivel
Hex Size	1-1/2 in
Material	Brass
Material Construction	Brass
Maximum Operating Pressure	150 psi
Operating Temperature	-65 to 250 deg F
Thread Size	1-5/16-12

Typical Application: Low Pressure Air, Fuel, Lube, and Oil Lines Pressure determined by tube material and hardness.
Our parts have been tested to max 150 PSI. Advantages: Easy assembly. No clamps needed!!

Assembly Instructions:

1- Lubricate insert.
2- Hold hose at angle as shown & push on and up
over first barb.
3- Continue to push straight on until hose is seated
under protective plastic cap. Keep hands back from
hose end area so that hose can expand.

Disassembling Instructions:

1- Split hose. Do not cut completely through hose.
Sealing edge of barb could be damaged.
2- Bend hose and remove with a quick pull.

See lead free section for lead free push-on barb fittings.
Stainless steel available at the end of this
section.