Midland Industries 30422 – Straight Swivel Connector, 1/4″ Push” Tube x 1/8″ MIP, Brass

Midland Industries 30422 Straight Swivel Connector, 1/4″ Push-In Tube x 1/8″ MIP, Brass

SKU: 30422
Additional Information	0.87 in Center to End, 0.060 lb Weight
Connection Size 1	1/4 in
Connection Size 2	1/8 in
Connection Type	Push-Fit|MIP
Connection Type 1	Push-In Tube
Connection Type 2	MIP
Dimensions	2.07 in L
Fitting Type	Connector
Hex Size	0.56 in
Material	Brass
Material Construction	Brass
Pressure Rating	150 psi

Typical Application: Low Pressure Air, Fuel, Lube, and Oil Lines Pressure determined by tube material and hardness.
Our parts have been tested to max 150 PSI. Advantages: Easy assembly. No clamps needed!!

Assembly Instructions:

1- Lubricate insert.
2- Hold hose at angle as shown & push on and up
over first barb.
3- Continue to push straight on until hose is seated
under protective plastic cap. Keep hands back from
hose end area so that hose can expand.

Disassembling Instructions:

1- Split hose. Do not cut completely through hose.
Sealing edge of barb could be damaged.
2- Bend hose and remove with a quick pull.

See lead free section for lead free push-on barb fittings.
Stainless steel available at the end of this
section.