Midland Industries 30397 – Straight Adapter, 3/8″ Push-On Hose Barbed x 3/4″ FIP, Brass

Midland Industries 30397 Straight Adapter, 3/8″ Push-On Hose Barbed x 3/4″ FIP, Brass

SKU: 30397
Additional Information	0.97 in Barb Length, 0.200 lb Weight
Connection Size 1	3/8 in
Connection Size 2	3/4 in
Connection Type	Barbed|FIP
Connection Type 1	Push-On Hose Barbed
Connection Type 2	FIP
Dimensions	1.97 in L
Fitting Type	Adapter
Hex Size	1.18 in
Material	Brass
Material Construction	Brass
Pressure Rating	150 psi
Thread Size	3/4-14

Typical Application: Low Pressure Air, Fuel, Lube, and Oil Lines Pressure determined by tube material and hardness.
Our parts have been tested to max 150 PSI. Advantages: Easy assembly. No clamps needed!!

Assembly Instructions:

1- Lubricate insert.
2- Hold hose at angle as shown & push on and up
over first barb.
3- Continue to push straight on until hose is seated
under protective plastic cap. Keep hands back from
hose end area so that hose can expand.

Disassembling Instructions:

1- Split hose. Do not cut completely through hose.
Sealing edge of barb could be damaged.
2- Bend hose and remove with a quick pull.

See lead free section for lead free push-on barb fittings.
Stainless steel available at the end of this
section.