Midland Industries 30286 – Swivel Connector, 5/8″ Push-On Hose Barbed x 5/8″ Male Inverted Flared,

Midland Industries 30286 Swivel Connector, 5/8″ Push-On Hose Barbed x 5/8″ Male Inverted Flared, Brass

SKU: 30286
Additional Information	0.140 lb Weight
Connection Size 1	5/8 in
Connection Size 2	5/8 in
Connection Type	Barbed|Male Inverted Flared
Connection Type 1	Push-On Hose Barbed
Connection Type 2	Male Inverted Flared
Dimensions	2-1/2 in L
Fitting Type	Connector
Hex Size	0.87 in
Material	Brass
Material Construction	Brass
Maximum Operating Pressure	150 psi
Thread Size	7/8-18

Typical Application: Low Pressure Air, Fuel, Lube, and Oil Lines Pressure determined by tube material and hardness.
Our parts have been tested to max 150 PSI. Advantages: Easy assembly. No clamps needed!!

Assembly Instructions:

1- Lubricate insert.
2- Hold hose at angle as shown & push on and up
over first barb.
3- Continue to push straight on until hose is seated
under protective plastic cap. Keep hands back from
hose end area so that hose can expand.

Disassembling Instructions:

1- Split hose. Do not cut completely through hose.
Sealing edge of barb could be damaged.
2- Bend hose and remove with a quick pull.

See lead free section for lead free push-on barb fittings.
Stainless steel available at the end of this
section.