Midland Industries 07220-0808-003 – Pipe Elbow, 1/2″ Push-On Hose Barbed x 1/2″ NPT(M), Brass,

AMC 07220-0808-003 Pipe Elbow, 1/2″ Push-On Hose Barbed x 1/2″ MNPT, Brass, Nickel-Plated

SKU: 07220-0808-003
Additional Information	1.5 x 1.19 in Center to End
Connection Size 1	1/2 in
Connection Size 2	1/2 in
Connection Type	Barbed|MNPT
Connection Type 1	Push-On Hose Barbed
Connection Type 2	MNPT
Dimensions	0.87 in W
Finish	Nickel-Plated
Fitting Type	Elbow
For Use With	Aluminum, Brass, Bronze, Copper, Iron and Steel Pipe
Material	Brass
Material Construction	Brass
Maximum Operating Pressure	1200 psi
Operating Temperature	-65 to 250 deg F
Thread Size	1/2-14

Typical Application: Low Pressure Air, Fuel, Lube, and Oil Lines Pressure determined by tube material and hardness.
Our parts have been tested to max 150 PSI. Advantages: Easy assembly. No clamps needed!!

Assembly Instructions:

1- Lubricate insert.
2- Hold hose at angle as shown & push on and up
over first barb.
3- Continue to push straight on until hose is seated
under protective plastic cap. Keep hands back from
hose end area so that hose can expand.

Disassembling Instructions:

1- Split hose. Do not cut completely through hose.
Sealing edge of barb could be damaged.
2- Bend hose and remove with a quick pull.

See lead free section for lead free push-on barb fittings.
Stainless steel available at the end of this
section.