iVac Fully Automated Pro Blast Gate

Breathe Easy With Automated Dust Collection For Ultimate Workshop Safety!

Dust collector blast gates let you control a dust collection system’s vacuum pressure in order to achieve maximum suction at a desired tool station. Here’s how they work:

At each key tool station, a hose is attached to the tool and routed to the main dust collector vacuum

For each hose run, a gate is installed that can be turned on or off.

The blast gates are typically closed. When one gate is opened all vacuum pressure is made available to that tool station

The iVAC Pro family of automated dust collector blast gates lets you control vacuum flows precisely and automatically. All of our blast gates are electrically driven and programmable. There are three methods of controlling an iVAC Pro Blast Gate:

Fully Automatic: When the power tool is turned on, the iVAC Tool Interface (iVAC Pro Tool, Pro Tool HP, Pro Tool Plus Auto Sensor) sends a wireless signal instructing the iVAC Pro Switch to turn on the Dust Collector, and this same signal is used to instruct the blast gate to open. When the power tool turns off it instructs the blast gate to close.

iVAC Pro Remote: In this mode an iVAC Pro Remote is used to send the Open and Close commands to the pro blast gate.

Remotely from a wired cable: In this mode the operation of a toggle switch on a wired cable will instruct the blast gate to open or close.

Features Include:

Fully automated, radio controlled opening and closing of dust collection blast gates

Turns off power automatically when dust collection system is not in use

Hands free dust collection of up to eight stations in your workshop

Visually confirm open or closed gates with automated green status flag

Fully FCC compliant radio transmitters that control the automated blast gates whenver your power tool is turned on

One Blast Gate Always Open feature to accommodate high performance systems

Motor overload protection

Self Cleaning mechanisms

Open/Closed indicator lamp

Removable slides

Auto – Open – Close modes of operation

Blast gate is powered from a 115Vac UL/CSA approved AC adaptor

Uses in your shop:

Never think about opening or closing a blast gate again!

Save your back the strain of reaching down and around to get at a blast gate