Infinity Tools Edge Banding Shape-Up Shaper Cutters

Make perfect fitting real wood edge banding for all of your plywood or MDF projects with these premium quality Edge Banding Shaper Cutters. Finish your plywood and MDF projects with real hardwood edge banding by following these simple steps; Start by making your first cut by aligning the center of the male profile to the center of your plywood or MDF board. Your next cut using the female profile will be on your hardwood stock. Make sure to align the center of this cutter with the center of your stock, cut to length on the table saw and glue together. Use either set with stock from ½” to 1″ thick.

Please note: Item 83-211 is a single cutter assembly that ships with two profile cutters, one slot cutter and one spacer.

83-210
Angle 90° | Bore 3/4″ | Cutter Diam. 2-5/8″ | Notes: V-Edge Banding Set | Profile V-Edge Banding | Spindle Bore 3/4″ | Stock 1/2″ to 1″

83-211
Angle 120° | Bore 3/4″ | Cutter Diam. 3″ | Notes: T-n-G Edge Banding | Profile Tongue & Groove Edge Banding | Spindle Bore 3/4″ | Stock 1/2″ to 1″