Premium Factory Matched Door Making Router Bit Sets w/ Backcutter!
Infinity Tools factory matched Raised Panel and Rail & Stile router bits are perfect for making beautiful door panels and frames in 3/4″ to 1″ thick stock. Produced using the most premium raw materials and manufactured on state-of-the-art C.N.C. machinery, our Rail & Stile and Raised Panel router bits represent the finest quality on the market. The extra-sharp carbide profiles are precision ground on computer controlled equipment to ensure a perfect fit and leave the smoothest finish possible with minimal sanding. Three wing slot cutters and engineered shear cutting geometry are a big improvement over inferior quality sets that burn and tear your material.
The factory matched Rail & Stile router bit set on this page leaves an attractive 7/16″ wide profile while cutting a full 1/4″ thick tongue and groove joint to accept your raised panel. Using 1/4″ plywood for your panel? You know it’s not going to be a full 1/4″ thick, right? No problem, click for our Plywood Panel Conversion Kits. These two piece slot cutter kits replace the 1/4″ slot cutters in the Stile and Rail profiles and give you a perfect fitting panel door when using undersized plywood panel stock.
Features include:
1-3/8″ wide Raised Panel profile with backcutter designed for 3/4″ to 1″ thick stock
7/16″ wide Rail & Stile profile designed for 3/4″ to 7/8″ thick stock
Includes Rail & Stile setup block
Includes custom wood storage case
Extra thick micro grain carbide edges last longer and stay sharper than inferior cutters
Specially designed cutting geometry allow our bits to cut cleaner and require little (if any) sanding
Reviews
There are no reviews yet.