Ikeuchi Mikihisa Kiridashi 9mm Marking Knife

Ikeuchi has been making knives in Miki City since 1953. Founded by Shozo Ikeuchi, the business was later joined by his sons, and now his grandson, Hiromi Ikeuchi continues the tradition. Miki City itself has been renowned for its tool making industry since at least the Edo period (it’s like the Sheffield of Japan), and these knives are an excellent example of the high–quality tools and hardware produced in the area. Made of premium Aogami #2 Steel, these marking knives are extremely sharp right out of the box, and have excellent edge retention.

Features:

• Aogami #2 Steel Blades

  Sometimes called Blue Paper Steel due to the color of the paper the steel comes wrapped in when sent to the blacksmith, Aogami is generally considered the premier Japanese steel for high end knife making.

  • Aogami Steel is a high carbon steel that has very few impurities. Tungsten and chromium added to improve wearability, setting it apart from other Japanese steels such as Kigami (Yellow Paper) and Shirogami (White paper).

  • Of the three types of Aogami steel (#2, #1, and Super) Aogami #2 is considered the “toughest”, if not the hardest, due to its ability to resist chipping, retain an edge, and continue to cut well even as it begins to dull.

  Long Narrow Blades – At 9mm wide (0.35 in), 2 mm thick (0.079 in), and 17 cm long (≈7 in), these knives are perfect for marking detailed joint lines, especially dovetails, where the narrow blades allow you to mark inside very small pin sockets when transferring marks from the tail board to the pin board.

  Chisel ground – Flat on one side and beveled on the other, allowing you to mark right up against your reference workpiece or ruler without straying off course or marring the mating part.

  Available in both right hand (104-003) and left hand (104-004) configuration, corresponding to which hand you prefer to use it in. We reccomend picking up both, regardless of dominant hand, as having the pair often comes in handy when getting into tight spaces, depending on the orientation of your work and what you’re trying to mark.