GRACO 2A25065 – Python Pneumatic Chemical Injection Pump, 1-1/4″ Air Motor, 1/4″ Plunger, FFKM

GRACO 2A25065 – Python Pneumatic Chemical Injection Pump, 1-1/4″ Air Motor, 1/4″ Plunger, FFKM Seals, 3500 PSI

Python pumps are ideal for applications that require a pump to operate in hazardous locations and can run off regulated natural gas or compressed air. These pumps have the lowest out-of-pocket cost, are easy to operate and can use half the air consumption of many other pumps on the market. Plus, the Pythons extreme duty plungers, seals and timing valve are designed for years of operation before replacement.

Additional Specifications

Max Working Pressure: 3500 PSI (24, 241 MPa, bar)

Configuration Number: PCI-125-25-XDS-0

Maximum Working Pressure: 3500 PSI (24, 241 MPa, bar)

Specifications

Air Inlet Size (in)	0.125
Air Motor Size (in)	1-1/4
Approvals	CE & ATEX
Compatible Material	Corrosion Inhibitors, Methanol, Scavengers
Fluid Outlet Size (in)	1/4
Material	Stainless Steel
Maximum Air Inlet Pressure (psi)	200
Maximum Continuous Cycle Rate (CPM)	60
Maximum Flow Rate (GPD)	18
Maximum Working Pressure (MPa)	10.3
Maximum Working Pressure (psi)	1500
Model	Python
Plunger Rod Coating	Chromex
Plunger Size (in)	1/4
Pump Material	316 Stainless Steel
Seal Material	FFKM
Standards Met	CE, ATEX
Type	Pneumatic Chemical Pump
Voltage	N/A
Wetted Material	Stainless Steel

Related Parts

2A25023 – Python Pneumatic Chemical Injection Pump, 1-1/4″ Air Motor, 1/4″ Plunger, FKM-ETP Seals, 3500 PSI

2A25044 – Python Pneumatic Chemical Injection Pump, 1-1/4″ Air Motor, 1/4″ Plunger, HNBR Seals, 3500 PSI

2A25030 – Python Pneumatic Chemical Injection Pump, 1-3/4″ Air Motor, 1/4″ Plunger, FKM-ETP Seals, 7000 PSI

2A25051 – Python Pneumatic Chemical Injection Pump, 1-3/4″ Air Motor, 1/4″ Plunger, HNBR Seals, 7000 PSI

2A25072 – Python Pneumatic Chemical Injection Pump, 1-3/4″ Air Motor, 1/4″ Plunger, FFKM Seals, 7000 PSI

2A25024 – Python Pneumatic Chemical Injection Pump, 1-1/4″ Air Motor, 3/8″ Plunger, FKM-ETP Seals, 1500 PSI

2A25045 – Python Pneumatic Chemical Injection Pump, 1-1/4″ Air Motor, 3/8″ Plunger, HNBR Seals, 1500 PSI

2A25066 – Python Pneumatic Chemical Injection Pump, 1-1/4″ Air Motor, 3/8″ Plunger, FFKM Seals, 1500 PSI

2A25031 – Python Pneumatic Chemical Injection Pump, 1-3/4″ Air Motor, 3/8″ Plunger, FKM-ETP Seals, 3000 PSI

2A25052 – Python Pneumatic Chemical Injection Pump, 1-3/4″ Air Motor, 3/8″ Plunger, HNBR Seals, 3000 PSI

Part is listed in a models table with configuration number and pressure specifications. The maximum pneumatic inlet pressure column appears to be empty for this model series.

Reference Manuals

3A9524 (Page 3) Python Chemical Injection Pump