GRACO 26C276 – Latching Solenoid

Original price was: $134.00.Current price is: $33.50.

SKU: SK0172317-US20260630-101428 Category: Tag:

GRACO 26C276 – Latching Solenoid

GRACO 26C276 is a genuine OEM latching solenoid used in select Graco systems to actuate a valve mechanism with minimal continuous power draw. Unlike a standard (continuous-duty) solenoid that must stay energized to hold position, a latching solenoid is designed to switch states using a brief electrical pulse and remain in position until commanded to changehelpful for reducing heat and power consumption in electronically controlled fluid/air circuits.

What It Does

    Electrically actuates a valve function (open/close or shift) within an OEM control circuit

    Latching design maintains its state without constant energizing (system-dependent)

    Supports consistent, repeatable cycling in automated or control-driven operation

Common Reasons to Replace

    Valve wont shift, wont hold position, or behaves intermittently

    Click/no-click condition during commanded actuation

    Coil damage from contamination, moisture intrusion, overheating, or wiring issues

    Troubleshooting confirms proper signal is present but actuation is inconsistent

Installation Notes

    Match the part number exactlylatching solenoids are not interchangeable with continuous-duty types.

    Before replacing, inspect the connector, harness, and control output for loose pins, corrosion, or damaged wiring.

    If the solenoid is mounted to a valve body, ensure sealing surfaces are clean and properly seated during reassembly.

    After installation, function-test the actuation cycle to confirm reliable switching and holding behavior.

Specifications

Brand GRACO
Part Number 26C276
Component Type Solenoid
Actuation Style Latching
OEM Status Genuine GRACO Replacement Part

Compatible Equipment

    Pulse Models

    SDP Models

Related Parts

    26C287 – Kit Bezel

    26C403 – Kit, Fc Meter Bezel

    26C484 – Kit, Bezel

Only compatible with Pulse and SDP Models. Listed as part reference 37 in the parts table with quantity of 1

Reference Manuals

    3A5412 (Page 34) Pulse Metered Dispense Valve

    3A5413 (Page 23) -Pulse, SDP and SDM Metered Dispense Valve Repair manual, Service Instructions

    3A6673 (Page 40) SDP8/SDP18 Preset Metered Dispense Valve, Pulse FC Enabled

    3A7274 (Page 33) Pulse Asset Refill Metered Dispense Valve, Installation and Operation

    3A7397 (Page 33) Pulse Metered Dispense Valve

Reviews

There are no reviews yet.

Be the first to review “GRACO 26C276 – Latching Solenoid”

Your email address will not be published. Required fields are marked *