GRACO 26C064 – Waste Oil Evacuation System, 24 Gallon Steel Tank, Sight Glass, Drain Funnel, Suction

GRACO 26C064 – Waste Oil Evacuation System w/ 24 gal Steel Tank, Suction Probes, Sight Glass, Oil Drain Funnel & Adapters, 7 PSI

Waste Oil Evacuation System model requiring assembly steps 9-12 (drain tube installation and drain bowl setup)

For shops requiring flexibility when it comes to removing used fluids, use Gracos multi-purpose used oil evacuation system.

Large Offset Collection Pan – Wide offset collection bowl prevents splashing.

Vacuum Gauge – Ensure peak performance with easy-to-read vacuum gauge.

Easy to Drain- Pressurize using shop air for easy oil evacuation.

Vacuum Probes- Variety of flexible suction attachments and adapters included.

Large 24 Gallon (90 Liter) Capacity Receiver- Perfect for small to large shops without an evacuation system.

Sight Glass – Inspect oil quality via large, clear evacuation chamber and verify amount extracted.

Additional Specifications

Max Working Pressure: Maximum Draining Pressure: 7 PSI (50 kPa, 0.5 bar), Maximum Air Inlet Pressure to Vacuum: 110 PSI (760 kPa, 7.6 bar)

Material: Steel Tank

Capacity: 24-Gallon (90 Liter)

Product Line: Oil Ace

Compatible Fluid	Used Oil;ATF
Maximum Operating Temperature (°F)	194
Minimum Operating Temperature (°F)	30
Overall Height (in)	59.0 to 70.8
Overall Length (in)	24
Overall Width (in)	16
Tank Capacity (gal)	24
Type	Fluid Reclamation Package
Weight (lb)	73.2
Wetted Parts	Steel, Copper, PVC Plastic, Rubber, Aluminum

Compatible Equipment

Oil Ace system

Models 26C061

26C063 – Waste Oil Evacuation System w/ 24 gal Steel Tank, Suction Probes, Sight Glass, Oil Drain Funnel & Adapters, 7 PSI

26C064, Similar to model 26C062

Related Parts

119577 – Oil Receiver

26C061 – Waste Oil Evacuator

26C062 – Waste Oil Evacuator with Chamber

26C063 – Waste Oil Evacuator with Bowl

Pressurized oil drain for collection of used lubricants. For professional use only. Part of the Oil Ace series. Shows funnel, chamber, and collection bowl configuration in diagram. Step 6 installation instructions are specifically for Models 26C062 and 26C064 ONLY. For valve locations see Fig. 2, page 4. Uses chamber cover (13b) as shown in Fig. 11, page 7. This model requires additional assembly steps 9-12 for drain tube and drain bowl installation, unlike model 26C062. Uses components including drain tube (7a), hand wheel (7d), drain bowl (5a), filter tray (5b), and plastic funnel extension (8).

Reference Manuals

310864 (Page 1) 24 Gallon (90 Liter) Oil Ace