GRACO 26C061 – Waste Oil Evacuation System, 24 Gallon Steel Tank, Suction Probes & Adapters, 7 PSI

GRACO 26C061 – Waste Oil Evacuation System w/ 24 gal Steel Tank, Suction Probes & Adapters, 7 PSI

Waste Oil Evacuation System – one of the models covered in this valve identification manual section

For shops requiring flexibility when it comes to removing used fluids, use Graco’s vacuum-assisted evacuation system.

Vacuum Gauge – Ensure peak performance with easy-to-read vacuum gauge.

Easy to Drain – Pressurize using shop air for easy oil evacuation.

Vacuum Probes – Variety of flexible suction attachments and adapters included.

Large 24 Gallon (90 Liter) Capacity Receiver – Perfect for small to large shops without an evacuation system.

Additional Specifications

Max Working Pressure: Maximum Draining Pressure: 7 PSI (50 kPa, 0.5 bar); Maximum Air Inlet Pressure to Vacuum: 110 PSI (760 kPa, 7.6 bar)

Capacity: 24-Gallon (90 Liter)

Purpose: Pressurized oil drain for collection of used lubricants

Compatible Fluid	Used Oil;ATF
Maximum Operating Temperature (°F)	194
Minimum Operating Temperature (°F)	30
Overall Length (in)	24
Overall Width (in)	16
Tank Capacity (gal)	24
Type	Fluid Reclamation Package
Weight (lb)	50.7
Wetted Parts	Steel, Copper, PVC Plastic, Rubber, Aluminum

Compatible Equipment

Oil Ace system

Models 26C061 and 26C063

Uses vacuum gauge assembly (14) installed into tank adapter (13a)

Compatible with large wheels (2a), rear caster threaded post (2b), handle (10a), air inlet fitting (3)

Related Parts

119577 – Oil Receiver

26C062 – Waste Oil Evacuator with Chamber

26C063 – Waste Oil Evacuator with Bowl

26C064 – Waste Oil Evacuator with Chamber and Bowl

For professional use only. Part of the Oil Ace product family for waste oil collection. This page shows valve identification diagram (Fig. 1) for models 26C061 and 26C063. All valves are shown in closed position. Valves are labeled a, b, c, d, e, f, and 14a in the diagram. Model 26C061 valve locations referenced in Fig. 1, page 3. Uses vacuum gauge assembly (14) installation into tank adapter (13a) rather than chamber cover installation used by models 26C062 and 26C064. Setup instructions include wheel assembly, caster installation, handle mounting, air inlet fitting installation, and vacuum gauge assembly installation.

Reference Manuals

310864 (Page 1) 24 Gallon (90 Liter) Oil Ace