GRACO 25C454 – 7.5″ OD Flange Mount Agitator Motor 3″ 150 ANSI Flange Mounting Holes, UL

GRACO 25C454 – 7.5″ OD Flange Mount Agitator Motor 3″ 150# ANSI Flange Mounting Holes, UL

Low shear, electric, direct drive agitator mixes and maintains suspension of industrial coatings stored in fluid tanks.

For advanced control and energy savings, switch to electric agitators.

Electric agitators are up to 5 times more efficient than pneumatic agitators.

Speed remains constant, regardless of material level in tank.

Low shear mixing ensures uniform particle dispersion without material degradation.

Additional Specifications

Outside Diameter: 7.5 inches

Max Working Pressure: 150#

Flange Type: 3″ 150# ANSI Flange Mounting Holes

Mounting Holes: 3 inch 150# ANSI

Frequency: 60 Hz

Drive Type: Direct Drive

Mount Type: Flange Mount

Specifications

Construction	Stainless Steel
For Use With	Drum or Pressure Tank
Includes	Motor, Flange
Maximum Operating Temperature (°F)	104
Maximum Speed (RPM)	500
Maximum Viscosity (cP)	300
Minimum Operating Temperature (°F)	32
Motor Type	Electric
Power Rating (HP)	0.75
Power Rating (kW)	0.37
Type	Agitator
Weight Range (lb)	55-65

Compatible Equipment

Electric Direct Drive Agitator with VFD control

Related Parts

25C453 – 3″ Quick-Clamp Flange Mount Agitator Motor, UL

25C575 – 4 in Quick-clamp Flange Mount Agitator Motor, UL

25C462 – Pressure Tank Agitator Assembly, 5 gallon (19 L), UL

25C470 – Pressure Tank Agitator Assembly, 10 gallon, UL

25C471 – Pressure Tank Agitator Assembly, 15 gallon, UL

25C463, 25C453+ – 3″ Quick-clamp Flange Mount Agitator Motor, 25C575+ – 4″ Quick-clamp Flange Mount Agitator Motor, 25C462* – Pressure Tank Agitator Assembly (5 Gallon), 25C470* – Pressure Tank Agitator Assembly (10 Gallon)

This is a 60 Hz direct drive agitator motor with flange mount design. Related to other direct drive agitator motors and pressure tank agitator assemblies in the same product family. UL Listed Explosion Proof Inverter Duty Motor. Does not come with shaft or impeller – these must be ordered separately. Requires power from a variable frequency drive (VFD) to control speed and is not to be used without one. See manual 3A4793 for VFD controls part numbers. Referenced as agitator flange (part numbers 25C454 and 25C453) for installing to mounting surface. Holes required in mounting surface include shaft hole: 1″ – 2″ (2.54 cm – 5.08 cm). See FIG. 2 for installation hole locations.

Reference Manuals

3A4030 (Page 163) Intelligent Paint Kitchen

3A4553 (Page 3) 3A4553 EN-J, Manual, Electric Direct Drive Agitators