GRACO 24N259 – Husky 716 AL Pump, PP Center Section, SS Seats, SS Balls & PO Diaphragm

GRACO 24N259 – Husky 716 AL Pump, PP Center Section, SS Seats, SS Balls & PO Diaphragm

Industrial-grade air-operated double diaphragm pump featuring aluminum construction with stainless steel fluid section components and PTFE seals for reliable chemical processing applications

The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.

Center- and end-porting

No mechanical seals which causes fluid leaks or failures

Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels

Easy-to-service air valve and ball checks

3/4 in (19.05 mm) center- and end-porting

No seals to leak or fail

Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels

Additional Specifications

Material: Aluminum air motor, aluminum fluid section, stainless steel seats and balls, PTFE seals

Pump Size: 0.75 in

Pump Type: 716

Same As: D5333

Diaphragm Type: overmolded

Air Exhaust Port Size (in)	3/8
Air Exhaust Port Thread Gender	Female
Air Exhaust Port Thread Type	NPT
Air Inlet Size (in)	1/4
Air Inlet Thread Gender	Female
Air Inlet Thread Type	NPT
Application	Industrial
Ball Material	316 Stainless Steel
Center Section Material	Polypropylene
Compatible Material	Antifreeze, Detergents, Motor Oil, Grease & Oil, Hydraulic Fluid, Cutting Oil, Water – Wastewater Treatment, Water, Ink
Connection Type	Threaded
Diaphragm Material	PTFE Overmold
Fluid Inlet Size (in)	3/4
Fluid Inlet Thread Gender	Female
Fluid Inlet Thread Type	NPT
Fluid Outlet Size (in)	3/4
Fluid Outlet Thread Gender	Female
Fluid Outlet Thread Type	NPT
Fluid Section Material	Aluminum
Manifold Configuration	Center Port
Manifold O-Ring Material	PTFE
Material	Aluminum
Maximum Air Consumption (SCFM)	28
Maximum Air Pressure (MPa)	0.7
Maximum Air Pressure (psi)	100
Maximum Cycle Rate (CPM)	400
Maximum Flow Rate (GPM)	16
Maximum Fluid Pressure (MPa)	0.7
Maximum Fluid Pressure (psi)	100
Maximum Operating Temperature (°F)	225
Maximum Solid Size (in)	0.09375
Minimum Operating Temperature (°F)	40
Overall Height (in)	10.43
Power Source	Air
Seat Material	Stainless Steel
Standards Met	ATEX, CE
Type	Pneumatic Diaphragm Pump
Weight (lb)	8.5

Features

PTFE/EPDM overmolded diaphragms

Aluminum construction for durability

Stainless steel fluid contact components

NPT threaded connections

Air-operated double diaphragm design

Applications

Industrial chemical processing

Chemical transfer applications

Applications requiring corrosion-resistant materials

Compatible Equipment

Industrial air systems

Chemical processing equipment

Husky 716 pumps

Related Parts

24N093 – Husky 515 1/2 in NPT PP Pump, PP Center Section, PP Seats, PTFE Balls & PO Diaphragm

24N094 – Husky 515 1/2″ BSP PP Pump, PP Center Section, PP Seats, PTFE Balls & PO Diaphragm

24N095 – Husky 515 PVDF Pump PP Center Section, PVDF Seats, PTFE Balls & PTFE Overmolded Diaphragm

24N096 – Husky 515 1/2 in NPT AC Pump, PP Center Section, AC Seats, PTFE Balls & PO Diaphragm

24N097 – Husky 515 AC Pump, PP Center Section, SS Seats, SS Balls & PO Diaphragm

24N098 – Husky 515 1/2″ BSP AC Pump, PP Center Section, AC Seats, PTFE Balls & PO Diaphragm

24N257 – Husky 716 AL Pump, PP Center Section, AC Seats, PTFE Balls & PO Diaphragm

24N258 – Husky 716 AL Pump, PP Center Section, SS Seats, PTFE Balls & PO Diaphragm

24N260 – Husky 716 SS Pump, PP Center Section, AC Seats, PTFE Balls & PO Diaphragm

24N261 – Husky 716 SS Pump, PP Center Section, SS Seats, PTFE Balls & PO Diaphragm

Part of GRACO’s industrial pump series with PTFE/EPDM overmolded diaphragms, designed for chemical compatibility and industrial durability Has overmolded diaphragm parts shown in table below (table not visible on this page). Same as D5333 except for overmolded diaphragm parts.

Reference Manuals

338940 (Page 2) PTFE/EPDM Overmolded Diaphragms

308981 (Page 24) Air-Operated Diaphragm Pumps