GRACO 24N182 – Normally Open Vent Valves for use w/ G3 Standard Pumps – NPT, 3500 PSI

GRACO 24N182 – Normally Open Vent Valves for use w/ G3 Standard Pumps – NPT, 3500 PSI

Industry leading feature for your lube system needs.

Vent valves are designed to be mounted to the G3 Electric Lubrication Pump to make it simple to install your injector based lube systems.

Easily mounts to your G3 pump.

Eliminates time and material costs associated with remote mounted vent valves.

230 VAC

Normally Open

The normally open valve works with the G3 Standard no control pump. With an external control just add power to the pump and valve to run a lube cycle, and remove power from both to vent pressure.

Adjustable pressure relief is integrated into the valve, no need to purchase an additional relief valve.

DIN Power Connection

Additional Specifications

Max Working Pressure: 3500 PSI (241 bar, 24 MPa)

Voltage: 230 VAC

Valve Type: Normally Open (NO)

Connection Type: DIN

Application	On-Road Vehicles, Off-Road Equipment
Compatible Material	Grease
Factory Set Pressure (psi)	4000
For Use With	G3 Pumps
Inlet Thread Type	NPT
Maximum Flow Rate (GPM)	5
Maximum Working Pressure (MPa)	24
Maximum Working Pressure (psi)	3500
Outlet Thread Type	NPT
Relief Rate (GPS)	0.13
Type	Vent Valve

Compatible Equipment

G3 Pumps

Related Parts

24M478 – Direct-Mount Vent Valves for G3 Pumps – NPT, 12 VDC, 500-3500 psi (35-241 bar), Normally Open, RH

24M479 – Direct-Mount Vent Valve for G3 Pumps – NPT, 24 VDC, 500-3500 psi, Normally Open, RH

24M480 – Direct-Mount Vent Valve for G3 Pumps – NPT 115 VAC 500-3500 psi

24M483 – Direct-Mount Vent Valve for G3 Pumps – BSPP 115 VAC 500-3500 psi

24M484 – Direct-Mount Vent Valves for G3 Pumps – BSPP, 230 VAC, 500-3500 psi (35-241 bar), Normally Open, RH

24T178

25A211 – Direct-Mount Vent Valves for G3 Pumps – NPT, 24 VDC, 500-3500 psi, Normally Open, LH

This is a kit for vent valve with 230 VAC voltage rating, normally open configuration, with NPT threading and DIN connection. Manual number is listed as NA. Used to reduce system pressure and allow injector to reset. For professional use only. This is a vent valve kit for 230 VAC applications. Related parts include other voltage variants: 24M478 (12 volt DC, NO, NPT DEU), 24M479 (24 volt DC, NO, NPT DEU), and 24M480 (115 VAC, NO, NPT DIN).

Reference Manuals

332291 (Page 36) G3 Standard Automatic Lubrication Pump

3A1963 (Page 1) Direct Mount Vent Valve for G3 Pumps

3A8847 (Page 35) G5 Standard Auotomatic Lubrication Pump