GRACO 24B140 – HTX 2030 Topcoat Sprayer Kit, 3300 PSI

GRACO 24B140 – Kit, Sprayer, Topcoat, Htx 2030, 3300 PSI

Specifications

Max Working Pressure: 3300 PSI maximum working pressure (228 bar, 22.8 MPa)

Application: less viscous materials

Control Type: adjustable pump control with rotating knob

Compatible Equipment

HTX 2030 (257369)

HTX 2030 Sprayer

Related Parts

257369 – HTX 2030 with Base Coat Pump

This appears to be a top coat pump kit for the HTX 2030 sprayer system. The kit is mentioned on page 8 and appears to be sold separately according to page 83 reference. Used for oil-based coatings, enamels, latex, block fillers, elastomerics, epoxies, drywall mud, and other high-build materials. Pump only runs when ON/OFF switch is in ON position and pump control is rotated clockwise away from OFF position. Pump control setting adjusts sprayer pressure – rotating knob fully clockwise allows sprayer to reach maximum working pressure. Pump runs whenever system pressure is below the setting of the pump control. Sprayer will not respond to Prime switch or Applicator switch when Top Coat pump is installed. Installation instructions found on page 70 under Displacement Pump section. This is a top coat pump kit that is sold separately. The manual page shows the component parts diagram but does not explicitly list which specific part numbers are included in kit 24B140.

Reference Manuals

313483 (Page 2) HTX 2030 257369, Operation, Repair ( Chinese)

313888 (Page 2) Operation, HTX 2030

313890 (Page 9) HTX 2030