GRACO 246367 – Husky 716 Diaphragm Pump w/ Drum Riser Tube, Aluminum, Clamped Design

GRACO 246367 – Husky 716 Diaphragm Pump w/ Drum Riser Tube, Aluminum Clamped Design

Husky 716 diaphragm pump designed for reliable fluid transfer in demanding applications, featuring proven air-operated double diaphragm technology for consistent performance with various fluid types

The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.

Center- and end-porting

No mechanical seals which causes fluid leaks or failures

Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels

Easy-to-service air valve and ball checks

3/4 in (19.05 mm) center- and end-porting

No seals to leak or fail

Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels

Additional Specifications

Flow Rate: 7.5 gpm @ 60 cpm, 3 cfm per gpm

Material: aluminum clamped design

Cycles Per Minute: 60 cpm

Pump Model: Husky 716

Air Exhaust Port Size (in)	3/8
Air Exhaust Port Thread Gender	Female
Air Exhaust Port Thread Type	NPT
Air Inlet Size (in)	1/4
Air Inlet Thread Gender	Female
Air Inlet Thread Type	NPT
Compatible Material	Antifreeze, Detergent, Motor Oil, Gear Oil, Hydraulic Fluid, Cutting Oil, Water – Wastewater Treatment, Water – Freshwater Treatment, Ink and Colorant
Fluid Inlet Size (in)	3/4
Fluid Inlet Thread Gender	Female
Fluid Outlet Size (in)	3/4
Fluid Outlet Thread Gender	Female
Fluid Section Material	Carbon Steel
Material	Carbon Steel
Maximum Air Consumption (SCFM)	28
Maximum Air Pressure (MPa)	0.7
Maximum Air Pressure (psi)	100
Maximum Cycle Rate (CPM)	400
Maximum Flow Rate (GPM)	7.5
Maximum Fluid Pressure (MPa)	0.7
Maximum Fluid Pressure (psi)	100
Maximum Operating Temperature (°F)	225
Maximum Solid Size (in)	0.09375
Maximum Working Pressure (MPa)	0.7
Maximum Working Pressure (psi)	100
Minimum Operating Temperature (°F)	40
Overall Height (in)	10.43
Power Source	Air
Type	Pneumatic Diaphragm Pump
Weight (lb)	8.5

Features

Aluminum clamped design for durability

Diaphragm pump technology

Includes drum riser tube

100 PSI maximum air inlet pressure

7.5 GPM flow rate at 60 cycles per minute

Air-operated double diaphragm pump technology

Applications

Fluid transfer from drums and containers

Industrial pumping applications

Material handling where drum access is needed

Fluid transfer operations

Industrial spraying systems

Chemical handling

Compatible Equipment

Husky 716 pump systems

Drum containers

Supply hose systems

Suction hose configurations

Complete pump plumbing systems

Related Parts

246366 – Husky 515 Diaphragm Pump w/ Drum Riser Tube, 100 PSI (0.7 MPa) Max Air Inlet

246368 – Husky 1050 Diaphragm Pump w/ Drum Riser Tube

246481 – Supply Husky 515 w/ Plumb Kit, 10 ft x 3/4″, 3/4″ ID

246482 – Supply Husky 716 w/ Plumb Kit

246676 – 1050 w/ Plumb Supply Kit

246375 – Complete Husky H716 Air/Fluid Pump System

246642 – Stainless Air-Operated Mastic Fluid Pressure Regulator, 3/4″, 100-4500 PSI Regulated

247956 – T1 Package: Includes 2 Pumps (Stainless) & 2 Supply Hoses, 25 Bar Fluid Pressure

246081 – T2 Complete Package: Includes 2 Pumps (Stainless Steel), 2 Supply Hoses, Air Supply Kit & Desicant Dryer Kit

Part of the Husky diaphragm pump family with drum riser tube for easy material access from containers Listed as part of two supply pumps with fluid plumbing category, indicating this is designed for dual pump configurations with integrated hose systems This is a pump kit that includes 1 pump and riser tube. The complete package (fluid and air) is part number 246375.

Reference Manuals

339221 (Page 7) Reactor IP – In-Plant Polyurethane Foam Processing Systems

349104 (Page 16) Reactor Parts and Accessories Brochure

309815 (Page 2) Reactor Feed Pump Kits, Operation and

313997 (Page 16) HFR, Setup-Operation

313998 (Page 13) HFR Hydraulic, Fixed-Ratio Proportioner, Repair