GRACO 2000501 – .030 Fluid Cartridge Kit, 20 PSI

GRACO 2000501 – .030 Fluid Cartridge Kit, 20 PSI

Fluid Cartridge Kit for General Industry application with 0.030 in. (0.8) orifice size

Specifications

Max Working Pressure: 5-20 PSI (0.035-0.14 MPa, 0.35-1.4 bar)

Orifice Size: 0.030 in. (0.8 mm)

Recommended Viscosity: light 5-15 centipoise

Typical Flow Rate: 4-10 oz/min (0.12-0.30 l/min)

Construction: SST Nozzle, PEEK Tip

Compatible Equipment

25F168 – Stellair Automatic Conventional Gun w/ Fluid Control Knob, General Industry, .042″ Nozzle

25F163 – Stellair Automatic Conventional Air Spray Gun, General Industry, .030″ Nozzle

25F181 – Stellair Automatic Air Spray Gun (Base Model, Requires Specific Nozzle/Cap Setup)

Related Parts

2000502 – .042 Fluid Cartridge Kit

2000503 – .055 Fluid Cartridge Kit

2000504 – .070 Fluid Cartridge Kit

25F224 – Nozzle Kit

2000502 – 0.042 in. Fluid Cartridge Kit

2000503 – 0.055 in. Fluid Cartridge Kit

2000504 – 0.070 in. Fluid Cartridge Kit

This is a fluid cartridge kit used with .030 orifice size spray guns. Compatible models include General Industry Conventional, General Industry HVLP, and General Industry Compliant spray gun models. Application: General Industry, Air Brush Trim. The fluid flow and pattern width depend on the size of the nozzle, the fluid viscosity, and the fluid pressure. Use a fluid nozzle that will achieve the required flow with the needle fully triggered at a fluid pressure of 5-20 PSI.

Reference Manuals

407194 (Page 32) Stellair Auto Air Spray Gun