GRACO 2000462 – 1″ i-Series Polypropylene Pulsation Dampener w/ PP Seats & SP Diaphragm

GRACO 2000462 – 1″ i-Series Polypropylene Pulsation Dampener w/ PP Seats & SP Diaphragm

PP seat with SP diaphragm and PTFE seat seal for i100P 1 in. port pulsation dampener

Reducing pulsation and vibration in your system will reduce stress on downstream equipment and increase system efficiency. Pulsation dampeners can improve the performance and reliability of your fluid transfer process

Additional Specifications

Material: PP seat, SP diaphragm, PTFE seat seal

Port Size: 1 in.

Seat Material: PP

Diaphragm Type: SP

Seat Seal Material: PTFE

Connection Type: P1 – 1 in. RF ANSI/DIN flg

Size: i100 (1 in.)

Kit Part Number: 2003015

Wetted Material: AL

Diaphragm Material: SP

Specifications

Connection Type	Flange
Diaphragm Material	Santoprene
Fluid Section Material	Polypropylene
Hazardous Location Approval	None
Inlet Size (in)	1
Maximum Flow Rate (GPM)	50
Maximum Fluid Operating Temperature (°C)	66
Maximum Fluid Operating Temperature (°F)	150
Maximum Fluid Pressure (MPa)	0.69
Maximum Fluid Pressure (psi)	100
Minimum Fluid Operating Temperature (°C)	0
Minimum Fluid Operating Temperature (°F)	32
Model	i-Series
Outlet Size (in)	1
Seat Material	Polypropylene
Series	1″
Type	Pulsation Dampener
Wetted Material	Polypropylene

Compatible Equipment

Model i100P – 1 in. Port

i100 (1 in.) dampeners

Related Parts

26D885 – 1″ i-Series Polypropylene Pulsation Dampener w/ PP Seats & PS Diaphragm

2000463 – 1″ i-Series Polypropylene Pulsation Dampener w/ PP Seats & BN Diaphragm

26D875 – 1″ i-Series Aluminum Pulsation Dampener w/ SS Seats & PS Diaphragm, 1″-11 NPT

2000454 – 1″ i-Series Aluminum Pulsation Dampener w/ SS Seats & PS Diaphragm

2000437 – 1″ i-Series Aluminum Pulsation Dampener w/ SS Seats & SP Diaphragm

2000452 – 1″ i-Series Aluminum Pulsation Dampener w/ SS Seats & SP Diaphragm

2000440 – 1″ i-Series Aluminum Pulsation Dampener w/ SS Seats & BN Diaphragm

2000455 – 1″ i-Series Aluminum Pulsation Dampener w/ SS Seats & BN Diaphragm

2000880 – 1″ i-Series Aluminum Pulsation Dampener w/ SS Seats & PO Diaphragm

2000881 – 1″ i-Series Aluminum Pulsation Dampener w/ SS Seats & PO Diaphragm

Kit Contents

1 or 2 diaphragms

1 diaphragm bolt seal (for non-overmolded diaphragms)

2 seats

2 or 4 seat seals

Spool seals

1 spool housing seal

1 package, adhesive

1 set screw (overmolded diaphragm only)

Part of the i100P model series with polypropylene fluid section material and P1 connection type This is a repair kit with kit part number 2003015. Materials: AL=Aluminum wetted section, SP=diaphragm material, PP=seat material. See Configuration Matrix on page 5 for material definitions.

Reference Manuals

3A7672 (Page 3) Pulsation Dampener