GRACO 17A174 – 16″ SmartDie II for 300TC ProMelt ThermoLazer

GRACO 17A174 – 16″ SmartDie II for 300TC ProMelt ThermoLazer

The SmartDie II System is the industry standard in screed box technologyonly from Graco. It’s innovative design allows users to use it with or without direct heat allowing more flexibility in all weather conditions. The 4-torch die heat system (standard on ThermoLazer ProMelt) allows contractors to optimize and extend their thermoplastic striping opportunities, especially in cooler climates. The unique “floating” die design allows the die to float with the constantly changing surfaces allowing the best possible line to be put downevery time. The no-tool die change out system makes it fast and simple to change out your dies when switching between different width lines commonly found in intersection jobs. No springs to bog you down by making you inspect and change out prior to laying down that stripe. No springs means saving time, money and hassle. These hardened steel dies with an innovative, built-in mil adjustment system are built to lastexactly what you’ve come to expect from Graco.

Specifications

Length: 16 in. (41 cm)

Compatible Equipment

ThermoLazer 300TC

ProMelt

Related Parts

17A173 – 2″ SmartDie II for 300TC ProMelt ThermoLazer

24H431 – 3″ SmartDie II for 300TC ProMelt ThermoLazer

24H426 – 4″ SmartDie II for 300TC ProMelt ThermoLazer

17J250 – 4.75″ SmartDie II for 300TC ProMelt ThermoLazer

24H432 – 5″ SmartDie II for 300TC ProMelt ThermoLazer

24H427 – 6″ SmartDie II for 300TC ProMelt ThermoLazer

24H433 – 7″ SmartDie II for 300TC ProMelt ThermoLazer

24H428 – 8″ SmartDie II for 300TC ProMelt ThermoLazer

24H434 – 9″ SmartDie II for 300TC ProMelt ThermoLazer

24H429 – 10″ SmartDie II for 300TC ProMelt ThermoLazer

Kit Contents

Requires 16″ (40 cm) Conversion Bead System Kit for 300TC/ProMelt Only (17B190 Kit, accy, 16″ (40 cm) Single Drop Bead System)

Requires 16′ (40 cm) Conversion Bead System Kit for 300TC/ProMelt Only. Available kits: 17B190 Kit (16′ Single Drop Bead System) and 17B189 Kit (16′ Double Drop Bead Box, requires 17B190 to be installed) Requires 16″ (40 cm) Conversion Bead System Kit for 300TC/ProMelt Only. SmartDie II used on ThermoLazer 300TC/ProMelt only. Part is marked with symbol indicating special requirements. SmartDie II used on ThermoLazer 300TC/ProMelt only. Requires 16″ (40 cm) Conversion Bead System Kit.

Reference Manuals

344507 (Page 6) ThermoLazer Brochure

3A1319 (Page 2) ThermoLazer and ThermoLazer ProMelt Pavement Marking Systems

3A1320 (Page 2) ThermoLazer 200/200TC/300TC and Thermolazer ProMelt Pavement Marking Systems

3A1321 (Page 2) ThermoLazer® 200/200TC/300TC and ThermoLazer ProMelt Pavement Marking Systems, Parts

3A1738 (Page 1) Smart Die II / FlexDie