GRACO 16E829 – Magnum Control Board Paint Kit for X5 / X7

GRACO 16E829 – Magnum Control Board Paint Kit for X5 / X7

Control Board Replacement Kit for X5, X7, LTS 15, and LTS 17

Replace your control board with genuine Graco parts. Electronic circuit control board with hard wired fuse. Comes with hardware for easy installation. Use with X5, series B, C, D; X7 series B, C, 262800, 262805. Refer to the parts manual for your sprayer to ensure part compatibility

Additional Specifications

Control Board Mounting Screw Torque: 20 – 35 in-lbs (2.3 to 2.8 Nm)

Side Shroud Screws Torque: 20 to 25 in-lbs (2.3 to 2.8 Nm)

Front Cover Screws Torque: 26 to 32 in-lbs (2.9 to 3.6 Nm)

Underside Shroud Screw Torque X7 Lts17: 25-35 in-lb (2.8-4.0 Nm)

Specifications

For Use With	X5, X7
Type	Repair Kit

Compatible Equipment

Project Painter 5

X5

X7

LTS 15

LTS 17 Airless Sprayers

Related Parts

288706 – Magnum Control Board Paint Sprayer Kit for X5 / X7

288705 – Control Board (ProX7, ProX9 Series B)

288900 – Control Board (ProX9 Series A)

Listed as one of three Control Board Replacement Kit part numbers (288706, 288707, 16E829). This manual contains kit installation instructions only. For detailed sprayer information and warnings, refer to Operation manuals 312079, 312082, 312001, 313034 included with Magnum sprayers. This is a control board replacement kit. Kit number 16E829 is mentioned alongside 288706 as replacement kits for the same models. Installation requires disconnecting wire leads, removing shrouds, and following specific torque specifications for reassembly. This is a control board kit for X5 and X7 paint sprayers across multiple series (B, C, D)

Reference Manuals

312342 (Page 1) Control Board Kit for Project Painter 5, Project Painter 7, Z5, X7, LTS 15, and LTS Airless Sprayers, Instructions, (English)

312667 (Page 29) X5, X7, ProX7 and ProX9 Airless Sprayer, Repair

313036 (Page 28) Magnum Airless Sprayers, LTS15, LTS17, ProLTS17, ProLTS19 Airless Sprayer, Repair