Amana LB10801-30 Carbide Tipped Non-Melt Plastic 10″ D x 80T M-TCG, -2 Deg, 30MM Bore, Circular Saw

Amana LB10801-30 Carbide Tipped Non-Melt Plastic 10″ D x 80T M-TCG, -2 Deg, 30MM Bore, Circular Saw Blade

When cutting acrylics and plastics, “chip-welding” a melting of the material is a concern. But not with these Non-Melt blades. With a modified triple-chip grind and a 2° negative hook angle, they produce less heat than a standard blade, leaving a crisp and smooth edge.

Excellent for cutting:

Plastics,

Acrylonitrile Butadiene Styrene (ABS),

Acetal,

Acrylic,

Acrylic Sheets,

Alupanel,

Copolymer,

Coroplast*,

Correx Boards,

Corrugated Polypropolyene,

Delrin,

Ethylene-Vinyl Acetate,

Foam Board, Gatorfoam**,

High Density Polyethylene (HDPE),

High Impact Polystyrene (HIPS),

Low Density Polyethylene (LDPE),

Lucite,

Mechanical/Engineered Plastics,

Nitrile RubberNylon,

Perspex Cast Acrylic Sheet,

Plastic Laminate Flooring,

Plexiglas, Poly (methyl methacrylate) (PMMA),

Polycarbonate (Lexan),

Polyethylene (PE),

Polyethylene Terephthalate (PET),

Polyethylene Terephthalate Glycol-Modified (PETG / PET-G),

Polypropylene (PP),

Solid Surface,

Styrene-Acrylonitrile,

Styrene-Butadiene Rubber (SBR),

Styrene-Isoprene-Styrene (SIS), Teflon,

Thermoplastic Polyolefin (TPO), Trespa Meteon***,

Ultra High Molecular Weight Polyethylene (UHMWPE),

Wood

*A soft plastic cardboard made with super soft super flexible PVC.

**A polystyrene foam board bonded between two layers of Luxcell wood-fiber veneer.

***Decorative high-pressure compact laminate (HPL) with an integral surface.