Amana AMS-160-Z 8-Pc CNC Aluminum Cutting Spiral O-Flute ZrN Coated Router Bit Collection

AMS-160-Z 8-Pc Aluminum Cutting Solid Carbide Spiral ‘O’ Flute CNC ZrN Coated Router Bit Collection

To be used only on CNC machines and routers with automatic feeding.

Using the highest quality sub-micrograin carbide these bits have a special proprietary edge processing system featuring a super high polished cutting edge with a unique mirror finish resulting in clean cuts, less chance for chip re-welding, a superior surface finish and a longer tool life. Right hand helix right hand cut.

Specifically designed for a variety CNC machining applications excellent for cutting:

ALPOLIC® Copper Composite
Material (CCM)

Alucobond®

Aluminum

Aluminum 5052

Aluminum 6061

Aluminum Alloys

Aluminum Composite
Materials (ACM)

Aluminum Composite Panel (ACP)*

Alupanel®

Brass

Copper

Dibond®

Durabond**

e-panel

Etalbond®

Fomex® with Aluminum Face

Gold

Non-Ferrous Metals

Plastic

Silver

Solid Surface

Titanium Composite Material (TCM)

Wood

Benefits of Mirror-Finish:

Razor sharp cutting edge

Effortless chip removal

Helps prevent chip re-welding

Extends tool life

Exceptional cut quality

Dissipates heat well and prevents melting

*Aluminum Composite Panel (ACP) is a type of ACM flat panel that consists of two thin aluminum sheets bonded to a non-aluminum core. ACPs are frequently used for external cladding or facades of buildings insulation and signage. **Durabond is a polyethylene core with 0.3mm colored aluminum sheet on either side pre-finished requiring no decoration.

Benefits of Zirconium Nitride (ZrN) Coating

Creates a harder and tougher cutting edge allows for a prolonged cutting edge life and helps to prevent the build-up of material in the flutes while cutting

Have the tendency to run/spin much faster than an uncoated tool

Optimized flute geometry and low Total Indicated Runout (TIR) guarantees clean cuts, essentially eliminates sanding and reduces chatter (where the machine or work piece vibrates) under high chip loads (when used with low TIR spindles)

High flute volume supports high feed rates and chip loads

High aspect ratio for single pass deep-reach cutting

Warning: Never attempt to cut ferrous metals with these bits. Inspect cut quality, adjust feed / speed accordingly. For optimal results and to extend tool life when trimming/cutting aluminum use mist lubricant system or air cooling.
Maximum RPM: 35,000
See below for set contents. Stored in a solid wood showcase storage box with a Plexiglas® clear lid. Includes full color booklet.
 
Wood Storage Box Dimensions
12″ L x 6″ W x 3″ H

Specifications:

Tool No.	Product Name	Qty
RB-102	RB-102 High Precision Steel Router Collet Reducer 1/4 Overall Dia x 1/8 Inner Dia x 1 Inch Long	1
51406-Z	51406-Z Solid Carbide CNC Spiral ‘O’ Flute, Aluminum Cutting 1/8 Dia x 5/16 x 1/8 Shank Up-Cut ZrN Coated Router Bit	1
51470-Z	51470-Z Solid Carbide CNC Spiral ‘O’ Flute, Aluminum Cutting 1/16 Dia x 1/4 x 1/8 Shank Up-Cut ZrN Coated Router Bit	1
51480-Z	51480-Z Solid Carbide CNC Spiral ‘O’ Flute, Aluminum Cutting 1/4 Dia x 3/4 x 1/4 Shank Up-Cut ZrN Coated Router Bit	1
51474-Z	51474-Z Solid Carbide CNC Spiral ‘O’ Flute, Aluminum Cutting 1/8 Dia x 1/4 x 1/4 Shank Up-Cut ZrN Coated Router Bit	1
51454-Z	51454-Z Solid Carbide CNC Spiral ‘O’ Flute, Aluminum Cutting 1/8 Dia x 1/2 x 1/4 Shank Up-Cut ZrN Coated Router Bit	1
51408-Z	51408-Z Solid Carbide CNC Spiral ‘O’ Flute, Aluminum Cutting 3/16 Dia x 1/2 x 1/4 Shank Up-Cut ZrN Coated Router Bit	1
51402-Z	51402-Z Solid Carbide CNC Spiral ‘O’ Flute, Aluminum Cutting 1/4 Dia x 5/8 x 1/4 Shank Up-Cut ZrN Coated Router Bit	1
51502-Z	51502-Z Solid Carbide CNC Spiral ‘O’ Flute, Aluminum Cutting 1/4 Dia x 5/8 x 1/4 Shank Down-Cut ZrN Coated Router Bit	1