Amana 45790 Carbide Tipped V Joint 80 Deg x 1-3/8 D x 1-37/64 CH x 1/2″ Shank Router Bit

The principal benefit of this glue-joint bit is that the glue seam is far less evident on the bevels of raised panels. Equally important, setup is fast. Cut one half of each joint with the bit at any height. Simply raise or lower the bit 3/32″ before cutting the mates. As with all glue-joint bits, the cutter profile expands the edge-to-edge glue surface, but more importantly, produces the precise surface alignment that’s essential for fast glueups. For best results use in a router table.